Mortara ELI 250 ECG Machine Display Assembly TRULY MTG2119-B1 Used-Good Parts for ECG Machine
■ Product Describe
This is a brand new original accessory for the ELI 250 ECG machine. It is a used disassembled accessory, but it functions normally. The accessory model is TRULY MTG2119-B1. It is an embedded LCD display component that can convert the data detected by the ECG machine into a waveform graph and display it on the display screen in real time for medical staff to view. At the same time, it can display the corresponding parameters such as heart rate, gain, filtering, and printer paper feed speed and other key parameters. The parameters can be adjusted by buttons. It is also equipped with a touch screen function, which is very convenient to use. The display component uses LED backlight technology, which can automatically adjust the brightness to ensure the readability of the display in strong light or dark environments.
■ Product Picture
■ Functions
1. Display ECG waveform
The detected ECG signal of the patient can be converted into a dynamic waveform and displayed in real time. By observing these waveforms, medical staff can judge whether the patient's heartbeat is normal and whether there are any arrhythmias.
2. Display key data
In addition to the waveform, it will also display the patient's heart rate, ECG measurement parameters (such as the height and width of the waveform) and other important information in the form of numbers and text, so that doctors can quickly understand the patient's condition.
3. Operation prompts and feedback
When you press the button on the machine to start measurement, print reports, etc., there will be prompts on the display, such as "Measuring" and "Printing", and the operation results will be fed back after the operation is completed, so that the operator can understand whether the operation is successful.
4. Adjust display settings
It supports simple setting adjustments. For example, if you think the waveform on the screen is too small to see clearly, or the color is not suitable, you can use the machine's buttons to adjust the size, color, brightness, etc. of the waveform on this screen to make the display effect more in line with your needs.
■ Products Parameters
| Product Name | Display Assembly |
| Model Number | TRULY MTG2119-B1 |
| Screen type | TFT LCD, LED backlight |
| Resolution | 320×240 pixels (QVGA) |
| Size | 3.5 inches (diagonal) |
| Brightness | ≥200 cd/m² (typical) |
| Contrast | 300:1 |
| Interface Type | LVDS (Low Voltage Differential Signaling) + I²C control bus |
| Operating temperature | 0°C to 40°C (meets medical equipment environment requirements) |
| Power consumption | ≤5W (≤1W in standby mode) |
| Protection level | IP21 (dust and drip proof) |
■ Product Advantages
1. Medical-grade reliability:
The display screen uses a scratch-resistant glass panel, which is suitable for use in medical environments where frequent clinical wiping and disinfection are required, and has very high durability. The display screen has an electromagnetic shielding layer that can shield external electromagnetic interference, reduce electromagnetic interference to the equipment, and ensure stable operation of the equipment.
2. High-definition display:
The display screen has a high resolution and a pixel density of 113 PPI, which can clearly present subtle waveform features (such as P waves and QRS complexes).
It has a wide viewing angle technology with no obvious color difference or distortion when observed from multiple angles.
3. Intelligent interactive optimization:
The display screen has a built-in filtering function, which can automatically filter the 10-second waveform with the lowest noise within 5 minutes to reduce repeated acquisition.
The function buttons are linked to the screen labels to support quick switching of display formats (such as 3+1, 6 channels, and 12 channels).
|
|
Mortara ELI 250 ECG Machine Display Assembly TRULY MTG2119-B1 Used-Good Parts for ECG Machine Images
|
